Syphon block VN 280 for VN 215 series

Not all engines allow installations where the main tube have recommended 2- 4 % angel. The reason why we recommend the 2- 4 % angel on the main tube is based that collected oil inside the tubing system are drained back to the crank case. The syphon blocks are specially made for oil mist detector installations where the main tubes are installed in horizontal position. The syphon blocks are designed to let the oil mist go through the pipe system and let the oil and oil droplets be drained back to the crank case. The design makes the installation of pipes quick and easy.


  • Easy installation
  • No need for main pipes system with 2- 4 % angel
  • Easy to maintenance


The syphon block for the VN 215 series have different part numbers acc. to th eposition of the syphon block in the pipe system. Please see overwiev under for more information!

  1. Mounting plate
  2. Fastening screw for sampling funnel
  3. Syphon block body
  4. Suction tubes to the OMD device


1 Syphon block VN 280 for 1 tube Part no.:  10140
1 Syphon block VN 280 for 2 tubes Part no.:  10142
1 Syphon block VN 280 for 3 tubes Part no.:  10143
1 Syphon block VN 280 for 4 tubes Part no.: 10144
1 Syphon block VN 280 for 5 tubes Part no.: 10145
2 Mounting plate for syphon block Part no.: 271544
3 O- ring set for siphon block VN280 Part no.: contact us
4 Block plug for siphon block VN 280 Part no.: 365287

Webdesign & Publiseringsløsning levert av Argo Internett AS ©