.

Error 6

- Supply voltage too high!

Step 1

Remove the reset task house... measure the voltage between pin 1 and 2 to be between 18 and 31,2 Vdc. Re- adjust the voltage if necessary!

If this does not help, do as follows...

Step 2

Replace the measuring head with an exchange unit!

Necessary parts used in the fault locating procedure:

Step 2: Exchange measuring head ** Replacing of measuring head



**Please check your model description for correct part number under “SPARE PARTS”!


.
Webdesign & Publiseringsløsning levert av Argo Internett AS ©